diff --git a/ip-settings.ps1 b/ip-settings.ps1
index 032456c..55cb01b 100644
--- a/ip-settings.ps1
+++ b/ip-settings.ps1
@@ -1,116 +1,141 @@
-# ip-settings.ps1 - Run as Administrator
-
-function Write-OK($msg)   { Write-Host "  [OK]  $msg" -ForegroundColor Green }
-function Write-Info($msg) { Write-Host "  [..]  $msg" -ForegroundColor Yellow }
-function Write-Err($msg)  { Write-Host "  [!!]  $msg" -ForegroundColor Red }
-
-# Admin check - no line continuation
-$id = [Security.Principal.WindowsIdentity]::GetCurrent()
-$wp = New-Object Security.Principal.WindowsPrincipal($id)
-$adminRole = [Security.Principal.WindowsBuiltInRole]::Administrator
-if (-not $wp.IsInRole($adminRole)) {
-    Write-Err "Please run this script as Administrator!"
-    Read-Host "Press Enter to exit"
-    exit 1
-}
-
-Clear-Host
-Write-Host "============================================" -ForegroundColor Cyan
-Write-Host "   LAN Network Profile Configurator        " -ForegroundColor Cyan
-Write-Host "============================================" -ForegroundColor Cyan
-
-# STEP 1 - List adapters
-Write-Info "Scanning network adapters..."
-$adapters = Get-NetAdapter | Where-Object { $_.HardwareInterface -eq $true } | Sort-Object InterfaceIndex
-
-if ($adapters.Count -eq 0) {
-    Write-Err "No network adapters found."
-    Read-Host "Press Enter to exit"
-    exit 1
-}
-
-Write-Host ""
-Write-Host "  Available Network Adapters:" -ForegroundColor White
-Write-Host ""
-
-$i = 1
-$adapterList = @()
-foreach ($a in $adapters) {
-    $ipInfo = Get-NetIPAddress -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
-    $iface  = Get-NetIPInterface -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
-    $currentIP  = if ($ipInfo) { $ipInfo.IPAddress } else { "No IP" }
-    $dhcpStatus = if ($iface -and $iface.Dhcp -eq "Enabled") { "DHCP" } else { "Static" }
-    $col = if ($a.Status -eq "Up") { "Green" } else { "DarkGray" }
-    Write-Host ("  [{0}]  {1,-35}  Status: {2,-12}  Mode: {3,-8}  IP: {4}" -f $i, $a.Name, $a.Status, $dhcpStatus, $currentIP) -ForegroundColor $col
-    $adapterList += [PSCustomObject]@{ Index = $i; Adapter = $a }
-    $i++
-}
-
-# STEP 2 - Pick adapter
-Write-Host ""
-$adapterChoice = Read-Host "  Enter adapter number"
-$selected = $adapterList | Where-Object { $_.Index -eq [int]$adapterChoice }
-if (-not $selected) {
-    Write-Err "Invalid selection."
-    Read-Host "Press Enter to exit"
-    exit 1
-}
-
-$nicName = $selected.Adapter.Name
-$nicIdx  = $selected.Adapter.InterfaceIndex
-Write-OK "Selected: $nicName  (Index $nicIdx)"
-
-# STEP 3 - Choose profile
-Write-Host ""
-Write-Host "  Profiles:" -ForegroundColor White
-Write-Host "  [1]  Camera Control  ->  192.168.178.22  /24   GW: 192.168.178.1" -ForegroundColor White
-Write-Host "  [2]  LAN Profile 2   ->  192.168.1.222   /24   GW: 192.168.1.1" -ForegroundColor White
-Write-Host "  [3]  DHCP (automatic)" -ForegroundColor White
-Write-Host ""
-$profileChoice = Read-Host "  Enter profile number"
-
-# STEP 4 - Apply
-Write-Info "Applying settings..."
-
-if ($profileChoice -eq "1") {
-    $newIP = "192.168.178.22"; $prefix = 24; $gateway = "192.168.178.1"
-    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
-    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
-    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
-    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ServerAddresses $gateway | Out-Null
-    Write-OK "Camera Control applied -> $newIP/$prefix  GW: $gateway"
-}
-elseif ($profileChoice -eq "2") {
-    $newIP = "192.168.1.222"; $prefix = 24; $gateway = "192.168.1.1"
-    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
-    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
-    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
-    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ServerAddresses $gateway | Out-Null
-    Write-OK "LAN Profile 2 applied -> $newIP/$prefix  GW: $gateway"
-}
-elseif ($profileChoice -eq "3") {
-    Set-NetIPInterface -InterfaceIndex $nicIdx -Dhcp Enabled
-    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ResetServerAddresses
-    Write-OK "Adapter '$nicName' switched to DHCP."
-}
-else {
-    Write-Err "Invalid profile choice. No changes made."
-    Read-Host "Press Enter to exit"
-    exit 1
-}
-
-# STEP 5 - Verify
-Write-Info "Verifying new config..."
-Start-Sleep -Seconds 2
-$verify = Get-NetIPAddress -InterfaceIndex $nicIdx -AddressFamily IPv4 -ErrorAction SilentlyContinue
-if ($verify) {
-    Write-Host ""
-    Write-Host "  Current IP : $($verify.IPAddress)/$($verify.PrefixLength)" -ForegroundColor Green
-} else {
-    Write-Info "No IP yet (normal for DHCP)"
-}
-
-Write-Host ""
-Write-Host "  Done!" -ForegroundColor Cyan
-Write-Host ""
+# ip-settings.ps1 - Run as Administrator
+
+function Write-OK($msg)   { Write-Host "  [OK]  $msg" -ForegroundColor Green }
+function Write-Info($msg) { Write-Host "  [..]  $msg" -ForegroundColor Yellow }
+function Write-Err($msg)  { Write-Host "  [!!]  $msg" -ForegroundColor Red }
+
+# Admin check
+$id = [Security.Principal.WindowsIdentity]::GetCurrent()
+$wp = New-Object Security.Principal.WindowsPrincipal($id)
+$adminRole = [Security.Principal.WindowsBuiltInRole]::Administrator
+if (-not $wp.IsInRole($adminRole)) {
+    Write-Err "Please run this script as Administrator!"
+    Read-Host "Press Enter to exit"
+    exit 1
+}
+
+Clear-Host
+Write-Host "============================================" -ForegroundColor Cyan
+Write-Host "   LAN Network Profile Configurator        " -ForegroundColor Cyan
+Write-Host "============================================" -ForegroundColor Cyan
+
+# STEP 1 - List adapters
+Write-Info "Scanning network adapters..."
+$adapters = Get-NetAdapter | Where-Object { $_.HardwareInterface -eq $true } | Sort-Object InterfaceIndex
+
+if ($adapters.Count -eq 0) {
+    Write-Err "No network adapters found."
+    Read-Host "Press Enter to exit"
+    exit 1
+}
+
+Write-Host ""
+Write-Host "  Available Network Adapters:" -ForegroundColor White
+Write-Host ""
+
+$i = 1
+$adapterList = @()
+foreach ($a in $adapters) {
+    $ipInfo = Get-NetIPAddress -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
+    $iface  = Get-NetIPInterface -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
+    $currentIP  = if ($ipInfo) { $ipInfo.IPAddress } else { "No IP" }
+    $dhcpStatus = if ($iface -and $iface.Dhcp -eq "Enabled") { "DHCP" } else { "Static" }
+    $col = if ($a.Status -eq "Up") { "Green" } else { "DarkGray" }
+    Write-Host ("  [{0}]  {1,-35}  Status: {2,-12}  Mode: {3,-8}  IP: {4}" -f $i, $a.Name, $a.Status, $dhcpStatus, $currentIP) -ForegroundColor $col
+    $adapterList += [PSCustomObject]@{ Index = $i; Adapter = $a }
+    $i++
+}
+
+# STEP 2 - Pick adapter
+Write-Host ""
+$adapterChoice = Read-Host "  Enter adapter number"
+$selected = $adapterList | Where-Object { $_.Index -eq [int]$adapterChoice }
+if (-not $selected) {
+    Write-Err "Invalid selection."
+    Read-Host "Press Enter to exit"
+    exit 1
+}
+
+$nicName = $selected.Adapter.Name
+$nicIdx  = $selected.Adapter.InterfaceIndex
+Write-OK "Selected: $nicName  (Index $nicIdx)"
+
+# STEP 3 - Choose profile
+Write-Host ""
+Write-Host "  Profiles:" -ForegroundColor White
+Write-Host "  [1]  Camera Control  ->  192.168.178.22  /24   GW: 192.168.178.1   DNS: 192.168.178.10 / 192.168.178.14" -ForegroundColor White
+Write-Host "  [2]  LAN Profile 2   ->  192.168.1.222   /24   GW: 192.168.1.1     DNS: Automatic" -ForegroundColor White
+Write-Host "  [3]  DHCP (automatic)                                               DNS: Automatic" -ForegroundColor White
+Write-Host ""
+$profileChoice = Read-Host "  Enter profile number"
+
+# STEP 4 - Apply
+Write-Info "Applying settings..."
+
+if ($profileChoice -eq "1") {
+    $newIP   = "192.168.178.22"
+    $prefix  = 24
+    $gateway = "192.168.178.1"
+    $dns1    = "192.168.178.10"
+    $dns2    = "192.168.178.14"
+
+    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
+    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
+    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
+    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ServerAddresses ($dns1, $dns2) | Out-Null
+
+    Write-OK "Camera Control applied"
+    Write-OK "  IP      : $newIP/$prefix"
+    Write-OK "  Gateway : $gateway"
+    Write-OK "  DNS 1   : $dns1"
+    Write-OK "  DNS 2   : $dns2"
+}
+elseif ($profileChoice -eq "2") {
+    $newIP   = "192.168.1.222"
+    $prefix  = 24
+    $gateway = "192.168.1.1"
+
+    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
+    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
+    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
+    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ResetServerAddresses | Out-Null
+
+    Write-OK "LAN Profile 2 applied"
+    Write-OK "  IP      : $newIP/$prefix"
+    Write-OK "  Gateway : $gateway"
+    Write-OK "  DNS     : Automatic"
+}
+elseif ($profileChoice -eq "3") {
+    Set-NetIPInterface -InterfaceIndex $nicIdx -Dhcp Enabled
+    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ResetServerAddresses
+
+    Write-OK "Adapter '$nicName' switched to DHCP"
+    Write-OK "  IP  : Automatic"
+    Write-OK "  DNS : Automatic"
+}
+else {
+    Write-Err "Invalid profile choice. No changes made."
+    Read-Host "Press Enter to exit"
+    exit 1
+}
+
+# STEP 5 - Verify
+Write-Info "Verifying new config..."
+Start-Sleep -Seconds 2
+$verify = Get-NetIPAddress -InterfaceIndex $nicIdx -AddressFamily IPv4 -ErrorAction SilentlyContinue
+$dnsVerify = Get-DnsClientServerAddress -InterfaceIndex $nicIdx -AddressFamily IPv4 -ErrorAction SilentlyContinue
+
+Write-Host ""
+if ($verify) {
+    Write-Host "  IP  : $($verify.IPAddress)/$($verify.PrefixLength)" -ForegroundColor Green
+}
+if ($dnsVerify -and $dnsVerify.ServerAddresses) {
+    Write-Host "  DNS : $($dnsVerify.ServerAddresses -join ' / ')" -ForegroundColor Green
+} else {
+    Write-Host "  DNS : Automatic" -ForegroundColor Green
+}
+
+Write-Host ""
+Write-Host "  Done!" -ForegroundColor Cyan
+Write-Host ""
 Read-Host "Press Enter to exit"
\ No newline at end of file