# ip-settings.ps1 - Run as Administrator

function Write-OK($msg)   { Write-Host "  [OK]  $msg" -ForegroundColor Green }
function Write-Info($msg) { Write-Host "  [..]  $msg" -ForegroundColor Yellow }
function Write-Err($msg)  { Write-Host "  [!!]  $msg" -ForegroundColor Red }

# Admin check - no line continuation
$id = [Security.Principal.WindowsIdentity]::GetCurrent()
$wp = New-Object Security.Principal.WindowsPrincipal($id)
$adminRole = [Security.Principal.WindowsBuiltInRole]::Administrator
if (-not $wp.IsInRole($adminRole)) {
    Write-Err "Please run this script as Administrator!"
    Read-Host "Press Enter to exit"
    exit 1
}

Clear-Host
Write-Host "============================================" -ForegroundColor Cyan
Write-Host "   LAN Network Profile Configurator        " -ForegroundColor Cyan
Write-Host "============================================" -ForegroundColor Cyan

# STEP 1 - List adapters
Write-Info "Scanning network adapters..."
$adapters = Get-NetAdapter | Where-Object { $_.HardwareInterface -eq $true } | Sort-Object InterfaceIndex

if ($adapters.Count -eq 0) {
    Write-Err "No network adapters found."
    Read-Host "Press Enter to exit"
    exit 1
}

Write-Host ""
Write-Host "  Available Network Adapters:" -ForegroundColor White
Write-Host ""

$i = 1
$adapterList = @()
foreach ($a in $adapters) {
    $ipInfo = Get-NetIPAddress -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
    $iface  = Get-NetIPInterface -InterfaceIndex $a.InterfaceIndex -AddressFamily IPv4 -ErrorAction SilentlyContinue
    $currentIP  = if ($ipInfo) { $ipInfo.IPAddress } else { "No IP" }
    $dhcpStatus = if ($iface -and $iface.Dhcp -eq "Enabled") { "DHCP" } else { "Static" }
    $col = if ($a.Status -eq "Up") { "Green" } else { "DarkGray" }
    Write-Host ("  [{0}]  {1,-35}  Status: {2,-12}  Mode: {3,-8}  IP: {4}" -f $i, $a.Name, $a.Status, $dhcpStatus, $currentIP) -ForegroundColor $col
    $adapterList += [PSCustomObject]@{ Index = $i; Adapter = $a }
    $i++
}

# STEP 2 - Pick adapter
Write-Host ""
$adapterChoice = Read-Host "  Enter adapter number"
$selected = $adapterList | Where-Object { $_.Index -eq [int]$adapterChoice }
if (-not $selected) {
    Write-Err "Invalid selection."
    Read-Host "Press Enter to exit"
    exit 1
}

$nicName = $selected.Adapter.Name
$nicIdx  = $selected.Adapter.InterfaceIndex
Write-OK "Selected: $nicName  (Index $nicIdx)"

# STEP 3 - Choose profile
Write-Host ""
Write-Host "  Profiles:" -ForegroundColor White
Write-Host "  [1]  Camera Control  ->  192.168.178.22  /24   GW: 192.168.178.1" -ForegroundColor White
Write-Host "  [2]  LAN Profile 2   ->  192.168.1.222   /24   GW: 192.168.1.1" -ForegroundColor White
Write-Host "  [3]  DHCP (automatic)" -ForegroundColor White
Write-Host ""
$profileChoice = Read-Host "  Enter profile number"

# STEP 4 - Apply
Write-Info "Applying settings..."

if ($profileChoice -eq "1") {
    $newIP = "192.168.178.22"; $prefix = 24; $gateway = "192.168.178.1"
    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ServerAddresses $gateway | Out-Null
    Write-OK "Camera Control applied -> $newIP/$prefix  GW: $gateway"
}
elseif ($profileChoice -eq "2") {
    $newIP = "192.168.1.222"; $prefix = 24; $gateway = "192.168.1.1"
    Remove-NetIPAddress -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
    Remove-NetRoute     -InterfaceIndex $nicIdx -Confirm:$false -ErrorAction SilentlyContinue
    New-NetIPAddress -InterfaceIndex $nicIdx -IPAddress $newIP -PrefixLength $prefix -DefaultGateway $gateway | Out-Null
    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ServerAddresses $gateway | Out-Null
    Write-OK "LAN Profile 2 applied -> $newIP/$prefix  GW: $gateway"
}
elseif ($profileChoice -eq "3") {
    Set-NetIPInterface -InterfaceIndex $nicIdx -Dhcp Enabled
    Set-DnsClientServerAddress -InterfaceIndex $nicIdx -ResetServerAddresses
    Write-OK "Adapter '$nicName' switched to DHCP."
}
else {
    Write-Err "Invalid profile choice. No changes made."
    Read-Host "Press Enter to exit"
    exit 1
}

# STEP 5 - Verify
Write-Info "Verifying new config..."
Start-Sleep -Seconds 2
$verify = Get-NetIPAddress -InterfaceIndex $nicIdx -AddressFamily IPv4 -ErrorAction SilentlyContinue
if ($verify) {
    Write-Host ""
    Write-Host "  Current IP : $($verify.IPAddress)/$($verify.PrefixLength)" -ForegroundColor Green
} else {
    Write-Info "No IP yet (normal for DHCP)"
}

Write-Host ""
Write-Host "  Done!" -ForegroundColor Cyan
Write-Host ""
Read-Host "Press Enter to exit"